Scott Walter, discussing robot-hand design with Marwa ElDiwiny on her channel, analyzes the Wuji hand from Wuji Tech and Pan Motors, including its actuation, dexterity, strengths, and tradeoffs.
Walter compares Wuji’s hand with the tendon-driven ALLEX from WIRobotics and Apex from Dexel Robotics. Wuji’s design places 20 rotary actuators across 20 degrees of freedom, with motors built into the fingers and no coupled joints. Its sub-600-gram weight and visible construction make it possible to examine how the mechanism works.
Walter explains how compact motors inside the fingers drive the PIP and DIP joints, likely using reducers to redirect rotation. He infers that a four-bar linkage moves MCP flexion remotely because a larger motor cannot fit at the knuckle. The layout puts stronger motors toward flexion, where they help carry loads, and uses smaller palm motors for abduction.
The thumb’s motor arrangement and angled mounting appear designed to work around tight packaging and approximate the thumb’s complex movement. Walter notes that the hand’s 20 degrees of freedom allow independent joint control, while its finger lengths and palm arch shape how naturally it closes and grips. The demonstrations include a two-finger lift of a 5-kilogram mass and a stated 20-kilogram power grip; Walter also points out that some teleoperated grasps look awkward, likely due to input-glove limitations.
Walter says direct rotary actuation may simplify control and sim-to-real transfer compared with tendons, while tendon-driven hands can offer advantages such as directional force feedback. He sees room for different designs: a soft hand like Tom Jang’s may suit healthcare, while a rigid, rugged hand may better serve industrial work. He also notes that changing hands can disrupt trained data and that integration with the robot’s arm and forearm matters.
Walter identifies actuator torque density and tactile sensing as major open challenges. Motor encoders can provide position and some force feedback, but they do not reveal exactly where or how an object touches the hand. He also argues that teleoperation gloves remain an obstacle, and says demonstrations should show tools being used correctly, such as scissors cutting paper.
Briefs summarise talks and interviews; timestamps open the video at that moment. Claims in a talk are the speaker's own.
RoboStrategy head of research Scott Walter, an aerospace engineer and robotics-company co-founder, joins host Herbert to discuss Tesla Optimus V3’s design, production readiness, and remaining engineering challenges.
Scott Walter, a robotics engineer and advisor, joins Over The Horizon hosts and guests to discuss Sharpa’s Dairy Queen deployment, Mimic’s dexterous hand, and Sunday Robotics’ home laundry results.
Host and robotics analysts Scott Walter, Devang Adhyaru of the Humanoid Hub, Gustav, and Merdad examine 1X Technologies’ Neo hand and its mechanical design, demonstrations, and remaining uncertainties.
Armin Foshnaughski of Munro & Associates, Schaeffler’s Al Mackie and Paul, and Scott Walter of RoboStrategy discuss the Unitree G1’s design and humanoid robotics during a Munro teardown.
Scott Walter joins The Humanoid Hub host to analyze Tesla’s Optimus hand and production plans, Figure’s robot output, and humanoid robots’ performance in the Beijing half marathon.
Host speaks with Scott Walter, a roboticist known for humanoid hardware analysis, on The Humanoid Hub about Tesla Optimus hand patents and what they reveal about the hand’s design.