This Robot Glides Like an Ice Skater
Aaed Musa, a mechanical engineering student and robotics builder, explains how he designed and controlled the Impulse wheel biped; no company affiliation or conversation partner is stated.
In this talk
- 0:26
Testing actuators and prototyping a leg
Inspired by the LimX Dynamics P1, Musa first set out to build a walking biped with six actuators. He measured the motors’ KV rating and stall torque to calibrate the ODrive Micro controllers and guide linkage design, then used inverse kinematics to move a single test leg along chosen paths.
- 5:33
Changing from walking to wheels
After struggling to balance the walking design with a basic control algorithm, Musa changed the goal to a wheeled robot. He replaced the planned feet with electric skateboard hub motors, added 12-bit magnetic encoders for finer position readings, and redesigned the robot as a Segway-like biped.
- 9:33
Balancing Impulse with control loops
Musa used PID controllers to adjust wheel speed based on the robot’s roll angle, compensate for its forward weight bias, and change leg length in response to sideways tilt or impacts. Because the robot’s dynamics vary with height, he measured useful proportional gains at different heights and fitted a linear approximation instead of implementing an LQR controller.
- 12:58
Building, naming, and testing
Electrical faults, broken legs, and repeated falls interrupted development, but Musa eventually got the robot working. He added a 3D-printed handle and named the finished robot Impulse, then moved on to testing.
Briefs summarise talks and interviews; timestamps open the video at that moment. Claims in a talk are the speaker's own.