RoboBoom

Humanoid Robot Safety: Why Cutting the Power Can Be Dangerous

Carol Franklin, director of standards development at the Association for Advancing Automation (A3), discusses robot safety standards and dynamically stable robots with Aaron Prather, A3’s director of market intelligence, at the International Robot Safety Conference in Detroit.

In this talk

  1. 3:17

    Safety standards for industrial robots

    Franklin explains that ANSI R15.06 covers industrial robots and their systems, while ISO 10218 provides the international framework. The 2025 editions of R15.06 and ISO 10218 are technically identical, so companies can use one consistent set of requirements across many markets.

  2. 7:27

    Mobile robots expand the safety challenge

    R15.08 addresses industrial mobile robots, whose hazards move with them through a facility. Franklin says this means considering the accessible facility with the care used for a fixed robot cell. She also distinguishes industrial settings, where workers can be trained, from service settings that may expose robots to untrained members of the public.

  3. 12:57

    Users carry safety responsibilities after installation

    ISO standards assign requirements to manufacturers, so A3 developed R15.06 Part 3 to address the user’s role, with Canadian colleagues contributing to aligned requirements. Users need to train workers and manage changes such as replacing a light curtain or adding equipment. Those changes can alter system behavior and may call for a new risk assessment or safety upgrades.

  4. 17:14

    Interoperability and dynamically stable robots

    Franklin describes ISO 21423, an international interoperability standard for industrial mobile robots, developed from work that included the MassRobotics specification. She says it can work alongside VDA 5050. The developing ISO 25785 standard covers dynamically stable industrial mobile robots, including humanoids, quadrupeds, and balancing robots; because they can fall without active actuator control, cutting power at an emergency stop could create a new hazard.

  5. 24:19

    AI and the standards work ahead

    Franklin says the ISO 25785 project is about halfway through its three-year development cycle, with a DIS ballot version targeted for May 2027. She notes that some dynamically stable robots may use AI to manage balance because people cannot make all the necessary rapid actuator adjustments manually. The group is also tracking joint ISO and IEC work on AI and functional safety, which the new robot standard is expected to reference.

Briefs summarise talks and interviews; timestamps open the video at that moment. Claims in a talk are the speaker's own.

More talks