RoboBoom
therobotstudio· April 24, 2023· 16:57

How to build the V2 #DexHand #humanoid #robot #hand by #3dprinting

The therobotstudio presenter explains the V2 DexHand design, 3D printing, and palm assembly.

In this talk

  1. 0:08

    V2 design changes

    The DexHand V2 moves its servos into the palm and uses larger wrist servos in the forearm for more power. The presenter added three forearm fans after a V1 component burned out, and is considering two more on the back of the hand. A concave palm and raised edge on the little-finger side are intended to improve gripping.

  2. 2:08

    Tendons, springs, and fit

    The extender cables are routed outside for easier access; elastic bands currently need frequent replacement. The presenter is looking for metal springs of the right size and price, and plans to test springs to hold the knuckle shells in position. The design allows about 0.4 mm for moving parts and 0.1 mm for fits.

  3. 3:46

    Preparing and printing the palm

    The palm is divided into four printable parts and sliced in Bambu Studio for a strong, dense print. The planned print takes eight hours and uses 213 grams of filament, with a 0.6 mm nozzle and 0.4 mm layer thickness. The presenter stresses drying nylon filament and calibrating printer dimensions and support offsets to make printing and support removal easier.

  4. 6:17

    Removing supports and assembling the palm

    The printed parts are usable, though some surfaces could be finer, and the presenter emphasizes wearing gloves while removing supports. During assembly, the shell fits tightly and contributes to the structure; slight tension in the carbon-fiber nylon parts makes the hand rigid. By the end, the V2 palm is partly assembled, with finger assembly, tendons, forearm parts, motors, electronics, and code still ahead.

Briefs summarise talks and interviews; timestamps open the video at that moment. Claims in a talk are the speaker's own.