Dexterous Robotics with Biomimetic Tissues –and How to Make Them Simple Enough for Mass Production
Benedict, CEO of Alonic, discusses how biomimetic hand structures and programmable textile braiding could make dexterous, compliant robotic hands simpler to produce.
In this talk
- 2:14
Why biomimetic hands
Benedict’s work spans prosthetics, humanoid robotics and teleoperation, with the goal of making robotic movement more natural. He argues that compliant structures could improve prosthetic embodiment and make physical interaction safer, including for humanoids entering homes.
- 8:04
From anatomical prototype to parametric design
An early hand used MRI-based, 3D-printed bones, laser-cut tendons and more than 30 actuators. Its natural-looking motion came from compliant joints and tendon arrangements, but its fragile materials, free-form geometry and many fasteners made it impractical to manufacture. Alonic developed parametric joint geometry in PTC Creo so designers can adjust dimensions and motion ranges without rebuilding each joint from scratch.
- 17:44
Braiding tendons and connective tissue
Alonic adapted programmable three-dimensional braiding to make branching rope structures that can form tendon networks without the weak attachment points created by knots, glue or sewing. The process can produce strong, compliant structures; Benedict said one tendon design supported loads in the range of a human flexor tendon, citing a scientific measurement of about 170 kilograms. Software translates a designed structure into machine operations, with machine vision planned for production quality checks.
- 27:18
A hand built with fewer assembly steps
A later prosthetic prototype combined braided tendons and soft tissues with six finger motors, a bridge and a thumb-position motor. The newer design braids a finger around four bones, incorporating tendons, ligaments and pulleys; the demonstrated version needed three screws, and the hand’s five fingers attach to the palm. Production took roughly three hours per finger, while the hand structure itself cost under $50 excluding motors.
- 34:34
Current limits and next steps
The team is building a faster, higher-resolution braiding machine and aims to reduce finger production time to under an hour. Current prototypes still need manual control and have unresolved friction, extension and fingertip design issues; estimated fingertip force was about 15 newtons. Benedict described possible future applications in wearables and robotic arms, while noting that material behavior still needs physical testing.
Briefs summarise talks and interviews; timestamps open the video at that moment. Claims in a talk are the speaker's own.