ALL ABOUT ROBOTIS Engineer Kit_Ep. 3_MAX-E1
YomiTV, host at ROBOTIS, builds the MAX-E1 humanoid with Manager Cho and an audience member, then challenges Cho to a robot-control match.
In this talk
- 0:08
Introducing the MAX-E1
YomiTV introduces the build as part of the ROBOTIS Engineer Kit series and asks about the MAX-E1. The audience member identifies it as a humanoid robot, and the assembly begins.
- 1:34
Assembling the robot
The build proceeds through small brackets, nuts, screws, DYNAMIXEL servos, and body parts. The assembler repeatedly checks servo orientation and cable alignment while fitting the head, arms, and legs. The instructions call for M2, M6, and other fasteners, with the same attachment steps used in several places.
- 18:42
Wiring and finishing MAX-E1
The assembler completes the feet and legs, then connects them to the upper body and controller. Two 240 mm cables run through the legs, while 180 mm cables connect the legs and arms to the controller. A battery holder and battery finish the build; the robot can also use an external adapter.
- 25:15
Testing the build and looking ahead
Manager Cho checks the assembly and says it was done well. YomiTV challenges Cho to a robot-control match, loses, and says the practice has made building feel more familiar; they played four rounds, and YomiTV won one. For the next build, SPI, Cho advises paying close attention to leg angles and offers help by chat.
Briefs summarise talks and interviews; timestamps open the video at that moment. Claims in a talk are the speaker's own.