ALL ABOUT ROBOTIS Engineer Kit_Ep. 2_Dr.R
An M.T.V. presenter from ROBOTIS works with a ROBOTIS Entertainment manager to assemble the Dr. R robot from the ROBOTIS Engineer Kit and connect it over Bluetooth.
In this talk
- 0:01
Introducing the kit
The presenter says they have been working on ROBOTIS Engineer Kit 1 and introduces the manager who will help with the demonstration. They begin reviewing the kit and its parts, including the base and motor components.
- 3:10
Sorting and assembling parts
The pair identify parts by their labels and numbers, including idler caps and M3 fasteners, and assemble several matching components. The host times the remaining four assemblies; the manager says they finished them in two minutes.
- 6:35
Building Dr. R
They work through the body, hinges, buttons, and other parts, checking orientation and part numbers as they go. The presenter notes that fitting some pieces is difficult and emphasizes getting the hinge and button directions right.
- 19:14
Adding the head and routing cables
They assemble the head, which includes a smartphone mount, then fit the remaining parts and route the cable through the robot. The presenter cautions against forcing or pulling a tight cable and installs the battery.
- 30:58
Connecting and wrapping up
The presenters use the buttons to start setup, choose Bluetooth, and select Dr. R. At the end, the manager says assembly was somewhat difficult but worthwhile, and the presenter previews Spy and Max E-1 for the next video.
Briefs summarise talks and interviews; timestamps open the video at that moment. Claims in a talk are the speaker's own.